Tapflo

Tapflo Fluid Handling India Private Limited

BROCHURES & MANUALS

CTX H - hygienic series

Materials, data and limits

Casing Stainless steel AISI 316L, wetted parts: electropolished Ra<0.8
Impeller Stainless steel AISI 316L electropolished Ra<0.8
Mechanical seal Single, SiC/carbon (std) or SiC/SiC, FDA approved
Double, SiC/carbon (std) or SiC/SiC, FDA approved
O-rings EPDM, FKM, NBR (all FDA approved)
Motor IP55; IEC frame B35; PTC thermistor; IE3; 3-phase
Pressure rating @ 20OC PN10 – CTX 40-165, CTX 50-145, CTX 50-200,
CTX 65-175
PN16 – CTX 65-230, CTX 65-240, CTX 80-205,
CTX 80-212, CTX 80-260, CTX 100-230
Liquid temp. -10 °C ... +120 °C
(140 °C for short periods during SiP)
Ambient temp. -20 °C ... +40 °C
Viscosity max ~150 cSt
 

Built-on frequency inverter

This is easiest and most flexible way of changing pump working parameters.

In addition, the pump and motor are protected from overloading and a soft-start function is included.

Hygienic shroud

The hygienic motor shroud in AISI 304L protects the motor against flooding, deposition of dirt, from spraying water during pump cleaning procedure.
 

Adjustable feet

The solution allows easy cleaning of the surface underneath the pump. It can also prove useful when there is a need to move the pump to a different location.

Casing drainage

The drain connection at the bottom of the pump casing allows to fully drain the pumped liquid from the casing.

 

Connection dimensions

Model DIN 11851 thread (std.) DIN 32676 clamp SMS3017 clamp SMS 1145 thread RJT thread
Inlet Outlet Inlet Outlet Inlet Outlet Inlet Outlet Inlet Outlet
CTX 40-165 DN40 DN32 DN40 DN32 38 33.7 38 32 1.5” 1.25”
CTX 50-145 DN50 DN40 DN50 DN40 51 38 51 38 2” 1.5”
CTX 50-200 DN50 DN40 DN50 DN40 51 38 51 38 2” 1.5”
CTX 65-175 DN65 DN50 DN65 DN50 63.5 51 63.5 51 2.5” 2”
CTX 65-230 DN65 DN50 DN65 DN50 63.5 51 63.5 51 2.5” 2”
CTX 65-240 DN65 DN40 DN65 DN40 63.5 38 63.5 38 2.5” 1.5”
CTX 80-205 DN80 DN50 DN80 DN50 76.1 51 76 51 3” 2”
CTX 80-212 DN80 DN65 DN80 DN65 76.1 63.5 76 63.5 3” 2.5”
CTX 80-260 DN80 DN65 DN80 DN65 76.1 63.5 76 63.5 3” 2.5”
CTX 100-230 DN100 DN80 DN100 DN80 101.6 76.1 101.6 76 4” 3”